8
9
B - 3 C u r r e n t t i m e m o d e ( T I M E ) : S e t u p
■How to Set up
To start set up, hold button A in current time mode.
Screen shows 'ADJUST HOLd' at first, and then goes to set up.
Press button C to add value, and button D to decrease.
By holding either button can change value quickly.
Each time you press button B, you can switch to the next menu.
Press button A to save and finish set up immediately.
*Press either button C or D to switch Time zone, 24-Hour/12-Hour, and
Unit for altitude.
MR stands for meter, and FT stands for feet.
*Press either button C or D to reset second to 00. (You only can set
second to 00.)
*If you don't press any button for more than 30 seconds, it automatically
goes back to current time mode.
Time Zone
Hour
Minute
Second
Year
Month
Day
24-Hour/12-Hour
Unit for altitude
Set up finished
C - 1 Compass mode (COMP): General Guide
■Idle
If you leave it on compass mode for more than 1
minute, this watch starts idling.
While idling, Direction or Azimuth will not be
shown.
Press either button C or D to recover to compass
mode.
■Direction and Azimuth
Screen shows Direction and Azimuth on compass mode.
Azimuth here means the angle formed between North and the
direction this watch is heading.
Please refer to the next page for more information.
■Information on the screen
North indicator
Idle
Cautions about Compass
-As ordinary azimuth magnet, this watch shows magnetic
north, which is slightly different from real north. Please refer to
the page 11 to calibrate this difference.
-To maintain compass accuracy, please set up compass time to
time. (Please refer to page 12 regarding compass set up.)
-To maintain compass accuracy, please do not use this watch
under such conditions below:
1. Near some Magnetic products, metal products, or Electric
appliances
2. In some vehicle, or ferro-concrete buildings
-When you put off this watch, please do not leave it near
magnets or magnetic objects (such as Mobile phones, Speakers,
or PCs).
Direction
Azimuth
Current time
