18
19
G-1 Chronograph mode (CHRO): General guide
■Information on the screen
■Chronograph mode
This mode works as stopwatch.
Before start to measure, '00:00,00' appears in the middle.
■How to use
Press button C to start chronograph.
Press button D to stop.
Press button C to resume chronograph again.
When it is stopped, press button D to reset it.
Lap time
Total time
Lap number
■How to save chronograph data
Hold button A while chronograph is stopped, to save data.
Screen shows 'NEXT HOLd' at first, and then records chronograph data.
Recorded data is stored on Chronograph data mode. (Please refer to
page 20.)
If 'FULL DATA' is displayed when holding button A, 5
chronograph data is already recorded.
Please delete chronograph data to save another data.
(Please refer to page 20.)
*To check split time in detail, you need to save
chronograph data.
5 data is already
recorded.
G-2 Chronograph mode (CHRO): Split time
■How to use lap time
Lap time helps you to split the measured time at a certain length.
This watch can take up to 10 lap times.
While chronograph is working, press button C to record lap time.
Lap number and time will appear for 3 seconds, and then it automatically
goes back to main time.
Press button D to stop chronograph, as in page 18.
LAP 01
