Lacunza ITACA 100, Instruction Book

Page: 4 / 44

PRESENTATION OF THE APPLIANCE 3
1.
PRESENTATION OF THE APPLIANCE
For optimum operation of the appliance, we advise you to read this manual carefully before
switching on the appliance for the first time. In case of problems or concerns, we urge you to
contact your dealer, who will cooperate with you.
In order to improve the product, the manufacturer reserves the right to make changes
without notice by updating this document.
This appliance is designed to burn wood in absolutely safe conditions.
WARNING : Faulty installation may have serious consequences.
Installation and all necessary regular maintenance operations must be performed by an
authorized installer in full accordance with the specifications set out in the legislation
applicable in each country and this instruction book.
1.1. General characteristics
Unit ITACA 80 ITACA 100 ITACA 120
Nominal Heat Output (N.H.O.) to atmosphere kW 12 17 16.5
Efficiency at N.H.O. % 85 78 81
CO emission at 13% O2 at N.H.O. % 0,08 0,19 0,28
Gas mass flow at N.H.O. g/s 9.1 10 14
Gas temperature downstream of flue socket at N.H.O. ºC 212 315 250
Optimum flue draught Pa 12 12
12
Wood consumption (beech) at N.H.O. Kg/h 3.4 4,2 5,3
Dimensions of the firebox
Width mm 640 840 1040
Depth mm 360 360 360
Useful height mm 525 525 525
Dimensions of the logs cm 60 80 100
Volume heated (45w/m³) at N.H.O. m³ 267 355 377
Log load frequency h 1 1 1
Capacity of the ashpit L 2.7 2.7
2.7
Weight kg 255 300 350
Flue socket diameter mm 200 250 250
Voltage (AC) V 230 230 230
Frequency Hz 50 50 50
Energy efficiency class A+ A
A+/A
*
Energy efficiency index (EEI)
114/111
*
104/102
*
108/106
*
*
Energy efficiency for models with fans
Note: The values indicated in the above table are based on tests performed in accordance
with UNE-EN 13229, with logs with no more than 18% humidity and pressure conditions as
indicated in each case.