Lacunza Abodi, Instruction Book

Page: 8 / 27

INSTRUCTIONS FOR THE INSTALLER 7
2.
2.2.2. Location of the appliance in the
room
Choose a location in the room which
favours good hot-air distribution by
convection and radiation.
2.3. Installation of the appliance
2.3.1. Floor
Make sure that the base can withstand
the total constructed weight of the
appliance and its casing.
When the floor surface (base) is
combustible, fit suitable insulation.
2.3.2. Safety distances
Be sure to respect the appliance
installation distances from combustible
materials. Looking at the appliance head-
on:
Distance to
combustible
materials
(mm)
From the right-hand side 150
From the left-hand side 150
From the rear 200
From the front 1000
Bear in mind that it may even be
necessary to protect non-combustible
material in order to prevent breakage,
deformation, etc., as a result of
overheating if the non-combustible
material is not designed to withstand high
temperatures.
2.3.3. Checks before lighting for the first
time

Make sure that the glass/es is/are
not broken or damaged.

Make sure that the flueway is not
obstructed with packing or loose parts.

Make sure that the airtight joints
on the flue circuit are in perfect
condition.

Make sure that the doors close
properly.

Make sure that all moving parts
are fitted in place.
2.3.4. Height adjustment and levelling
the appliance
The appliance must be perfectly level,
horizontally and vertically, both at the
front and on the sides (use a spirit level).
2.3.5. Casing
Make sure that the material around the
appliance is not flammable or likely to
deteriorate as a result of heat (wallpaper,
carpet, plastic-based casing, Silestone,
etc.).
The image below gives an example of
how the appliance can be encased
properly:
Figure No.4 - Interior diagram of the casing