Lacunza Abodi, Instruction Book

Page: 16 / 27

INSTRUCTIONS OF USE 15
3.
3.7. Deflectors. Flapper valve
The appliance has an updraught-
regulating flapper valve on the flue socket.
This can be used to modify the section
through which the gases pass and,
consequently, control the updraught.
The appliance has 1 deflector.
You can see how it is fitted and
regulated in the following picture.
Figure No.12 - Mantling the deflector
3.8. Electrical system
Forced convetion. Fans
These models have a fan for the forced
convection of the hot air generated around
the appliance inside the shell. This air can
be piped to other rooms.
IMPORTANT: This appliance is not
covered by our warranty unless directly
connected to the mains electricity supply
in accordance with the conditions
described in the relevant section in 1.1.
Components:
M: 1 x 220V- 20W motors
T: 50ºC ceramic thermostat
Electrical diagram:
Figure No.13 - Electrical diagram for fans
Use:
With no fire the fans do not work.
Automatic: When the fire has been lit
and the thermostat reaches 50ºC, the fans
start to operate automatically at medium
speed. The fans stop automatically when
the temperature falls beneath 50ºC.
At certain moments, the fans may start
up and stop several times in just a few
minutes.