Lacor 69300, Instruction Manual

Page: 22 / 80

22
Handle the bottle with precaution, do not hit them or place them horizontally.
The bottles of compressed gases may only be filled by qualified suppliers of compressed
gases.
Every bottle is designed for a specific gas; do not switch one for another.
If you observe that the bottle is deteriorated or defective, inform your supplier and do not
handle it.
1.4. Equipment placement
Place the equipment in a place where the access to controls and connections is accessible
and easy.
Do not place the equipment in places that may reach temperatures above 35°C.
Do not place the equipment in humid places.
During installation, always respect local laws regarding safety.
The installation and equipment maintenance should only be performed by qualified staff.
1.5. Technical information
All
LACOR
equipment is entirely manufactured with stainless steel, guaranteeing its safety
and hygiene.
Only use original materials approved by the manufacturer.
The nominal input voltage is 220-240 V ~ 50 HZ.
All equipment operates with 24V direct current. The input is 3 Amp.