USB charging port:
This unit is equipped with a 5VDC/500mA USB
charging port (23) on the back panel. To utilize this function, simply
connect the device you would like to charge (e.g. smartphone or
tablet) to a USB cord and plug it into the USB charging port. The
device will be charged automatically when it is successfully
connected, even during playback. The USB port should only be
used when the AC-Charger is plugged into the unit.
Mode / Function key (8):
Press the key to toggle between the
modes below:
Bluetooth® mode:
This unit can play audio from any device with
Bluetooth A2DP. Simply pair your device to this unit to enjoy
Wireless Audio Streaming. Switch on the unit, and press “FUNC”
key (8) repeatedly until display shows the "BT" symbol in the LCD
display and the pairing status:
Searching:
BT symbol is flashing
slowly.
Pairing:
Flashing rapidly.
Connected:
BT symbol stays on.
To switch the unit to "SEARCHING" mode, press and hold the
"PAIR" key (6) for 2sec until the "BT" symbol begins flashing slowly.
Switch on BT function of the device you would like to pair with
(smartphone /tablet/laptop). Go to your device's BT setting. Add or
search for devices. Make connection on your device, if asked for a
pass code, enter “0000”. This is a one-time event per device. To pair
your unit with another device, please repeat the above steps. The
BD-100BT will store and recognize up to 5 devices, even if unit is
powered off. The unit will also automatically pair with the last paired
device if it is found when the unit is powered on and switched to BT
mode. Note that only one device can be paired at any given time.
Disabling BT connection:
to unpair a BT device that has already
been paired, press & hold “PAIR” key (6) for a few sec.
E3