FM Radio:
Press “FUNC” key repeatedly until display shows FM. To
improve radio reception, extend and adjust position of the telescopic
antenna. After tuning into a desired station, use “FM MODE” key to
select (MONO/ STEREO) mode. In some cases, when the reception
is poor, we recommend to use “MONO” mode for better quality.
Manual Frequency Adjustment:
Press “TUNE+” or “TUNE-“ keys
to manually adjust the radio frequency one step at a time. When the
desired station is reached, it can be saved into one of the “Memory”
positions. (See “Radio Memory” section for further details).
Automatic Frequency Adjustment:
Press & hold (for 2 seconds)
“TUNE+” or “TUNE-“ keys to seek the next available radio station.
When the desired station is reached, it can be saved into one of the
“MEM” positions.
Radio Memory:
After tuning into a desired station,
it can be stored into one of the 20 available memory positions. Short
press “PROG.” key (18) to go to memory tuning mode. Press &
release “MEM+” or “MEM –“ key to choose the desired memory
storage position you would like to store into (CH01 to CH20). Short
press “PROG.” key (18) again to confirm selection. To erase a
saved radio station, simply replace it with a new station in same
memory position.
Recalling a saved memory station:
Short press
“MEM+”/ “MEM-“ keys to find (recall) a desired memory position.
USB Player:
Insert USB stick (14) with MP3 files and select USB
mode. IMPORTANT: removal of USB drives! Never remove the USB
drives from the unit during playback. Always STOP playback to
prevent damage to your song files and memory devices itself.
NOTE:
It takes time to "Open & Verify" a large USB-Drive, and
count all the song files. (only when you first plug in the USB drive).
The more MP3 Files there are in your USB, the longer it takes
(approx. 1 minute per 4GB). Please be patient and allow the unit
enough time to complete the "INITIAL READING" (during the initial
"READ" process, the unit can play the 1st song immediately but you
won't be able to play the next or previous songs until the "READ"
process is completed).
E4