6 OPERATION
LACO Technologies
TITAN VERSA Operations and Maintenance Manual
97
LR Decimal Places
Select between either 1 or 2 for the leak rate decimal display.
Show Vacuum Pressure
This parameter is on by default. Unselect to not show the vacuum pressure on the test
screens.
Show Cycle Button
This parameter allows user to have an HMI controlled start / stop button in addition to
the physical button.
Screen Dim
Select this option to dim the screen by 50% from the following inactivity timepoints:
None, 5 min, 10 min, 20 min, and 30 minutes. By default, the screen is set to no dim
time.
Option Button
Select the desired Option key function from the table below.
Option Button Selections
Option Function Comments
None
Zero
Only works in Manual zero method.
Vent
Only works in Manual Vent options.
Data Log
Only works from stream method. Test Summary and
Test Summary and Stream will automatically data log.
Mute
Press button quickly to mute the audio.
Language
Select from the following screen language display options: English, Spanish, German,
French, Chinese.
The maintenance settings section has the following sub-menus:
•
Maintenance Tasks
•
Counters
•
Manual Control
•
Event History
•
Detector Info
•
Turbo Pump
•
Parameters
•
Pirani Calibration
