manualshive.com logo in svg

LaCie d2 Network 2, User Manual

Share
Download
LaCie d2 Network 2 User Manual Download Page 7

d2, 2big, and 5big Network 2 User Manual

7

 

LED BEHAVIOR

The front and rear LEDs indicate drive status and activity (only the 2big and 5big have rear drive LEDs). This
section describes the behavior of the LED indicators.

Technical note: Even if you have turned off the front LED using the Dashboard, events triggering a red
light will always cause the front LED to turn on.

d2

Front LED Color State

Blinking blue

Occurs as the device is booting; will cease once the drives are fully initialized

Backup in progress

Solid blue

Drive working (read/write)

Blinking red

Temperature alert (first level)

Power supply has been cut but power is still being supplied through the UPS

Solid red

Temperature alert (critic level) – the product will shut off

Power supply has been cut and the UPS has run out of reserve power – the product will
shut off

Summary of Contents for d2 Network 2














































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands