LaCie d2 USB 3.0
• D
esign
by
n
eil
P
oulton
Introduction
User Manual
page 9
1.4. Hard Disk Heat Management
Heat Dissipation Design
The LaCie d2 USB 3.0’s metal body is ideal for naturally dissipating
internal drive heat. Its unique design actually draws heat away from
the internal drive toward the external casing. The large surface area
of the heat sink casing absorbs internal heat and dissipates it, keep-
ing the drive safe and prolonging its life and reliability.
As a con-
sequence, it is normal that the external casing is warm to the touch.
Please make sure that the vent on the back-bezel is not obstructed
and that there is a natural airflow across the casing.
Upright, Stack & Rackmount Configuration
Heat dissipation is maximized when the d2 USB 3.0 is in the upright
position. When stacking LaCie d2 USB 3.0s, please remember to
attach the included rubber feet on the under side of your drives.
This will allow for some airflow between your drives so that the heat
dissipation can work effectively.
CAUTION:
To prevent overheating, do not stack more than three
d2 USB 3.0 hard drives, especially if these drives are turned on
simultaneously.
Exclusive d2 Heat Sink Design
Provides 60% more
area for heat dissipation
Heat Sink
Design
Standard
Design
