LaCie LaCinema Black MAX
Setting Up the LaCinema Black MAX
User Manual
page 14
Setup consists of six steps:
✦
STEP 1: Connect to TV
(section
3.1
)
✦
STEP 2: Connect to Digital TV Antenna
(section
3.2
)
✦
STEP 3: Connect the Power Supply
(section
3.3
)
✦
STEP 4: Turning on the TV
(section
3.4
)
✦
STEP 5: Complete the Installation Wizard
(section
3.5
)
✦
STEP 6: Connect to Your Network
(section
3.6
)
3.1. STEP 1: Connect to TV
The LaCinema Black MAX supports different ways of connecting
to televisions. From the following methods, choose the setup that
matches the ports on your television or receiver:
✦
HDMI (section
3.1.1
)
✦
SCART (via included SCART to RCA converter cable) (sec-
tion
3.1.2
)
In each of the above connection methods, it is possible to connect
the LaCinema Black MAX to home theater systems by plugging the
S/PDIF cable (not included) to your digital amplifier via the digital
optical audio connector (see section
3.1.3. Component & Analog
Stereo Audio (High Definition) Connection
for details.
The chart at right illustrates the qualities made possible by the
different connection methods.
IMPORTANT INFO:
The connection diagrams shown below
represent typical installations. These diagrams may not work with
certain in-house cable systems, master antenna installations, or
situations where TV programming is delivered using methods that
differ from industry accepted practices.
TECHNICAL NOTE:
The connectors on the rear of your TV may
not appear exactly the same as shown below. Please read the la-
bels next to the connectors carefully to ensure correct connections.
continued on the next page >>
3. Setting Up the LaCinema Black MAX
Definition
Connection
Maximum
Resolution
High
Definition
HDMI
1080i
Component
1080i
Standard
Definition
SCART RGB
576p
Composite
576p
