LaCinema Black RECORD
Setting Up the LaCinema Black RECORD
User Manual
page 27
3.6.2. Ethernet Network Connection
When connecting to your network via Ethernet, the LaCinema
Black RECORD automatically detects your network.
Connect the Ethernet cable (not included) to the back of the
LaCinema Black RECORD and to an Ethernet port on your router
(
Fig. 26
).
1. Go to
Home
menu and enter the
Settings Space
by pressing
the
Options/Settings
button.
2. Select the
Network
menu, press the
Down
button and se-
lect
Configure Network
.
3. Select
Ethernet Connection Mode
.
4. Select the connection method,
Automatic
or
Manual
.
✦
In automatic, network parameters will be defined auto-
matically.
✦
If you choose manual, you will asked to enter the LaCin-
ema Black RECORD’s IP address.
TECHNICAL NOTE:
If network is not managed by DHCP, you
may have to enter your IP address, subnet mask, router, and DNS
addresses.
5. Once done, you will go to redirected to the
Settings Space
menu.
6. You can check the network by selecting
Connection
in the
Network menu (
Fig. 27
).
For details on how to transfer files from your computer to your
LaCinema Black RECORD, see section
5.3.1. Network-Attached
Hard Disk (NAS)
.
Fig. 26
Fig. 27
