12
12) The
Copying files…
window will appear again, showing you the copying
rate. The next window that appears is the final window, click
Finish
to
complete.
To verify that the driver was installed correctly, right-click on
My Computer
,
then click on
Properties
. After the
System Properties
window is displayed,
click on the
Device Manager
tab and scroll down to the
Universal Serial
Bus controllers
icon and expand the selection by clicking on the plus sign.
Underneath the Universal Serial Bus icon, you should see two strings that say,
“NEC PCI to USB Open Host Controller” and one string that says “NEC
PCI to
USB Enhanced Host Controller (there may be another name at the beginning
of the strings, depending on the chip set manufacturer).”
If these are visible, then the installation of your LaCie USB 2.0 PCI Card
drivers is now finished and you may begin using your new card.
Windows XP
1) Turn on your computer. Insert the LaCie Driver CD (shipped with your PCI
card) in your computer’s internal CD-ROM drive. A window will appear from
your
System Tray
(located in the lower right-hand corner of your screen),
alerting you that the operating system (Windows XP) has detected new
hardware.
2) When the
Found New
Hardware Wizard
window (Fig. 2.1) appears
on the screen, select
“Install from a list or
specific location…” and
click
Next
to continue.
Fig. 2.1
