LACAVA
5
11. Slide the escutcheon over the spout and
push it back until it is flush with the wall.
10. Insert the spout onto the spout base,
align and then tighten the screws into the rough-in.
12. Place an escutcheon over each handle base making
sure the rubber o-rings are in their designated
place on both esctucheons.
13. Align the handles (knobs or levers) in the desired CLOSED
position and place over the cartridge stems, then align
the handle bases with set screws on the bottom, and
thread each set screw onto each cartridge extension.
14. Push both handle escutcheons back until they are flush
with the wall.
15. If desired, place a small bead of silicone around outside
edge of each escutcheon.
16. Turn on the water supply and check for any leaks.
