Lacanche Fontenay, Manual

Page: 15 / 47

INSTALLER’S MANUAL
CHAMBERTIN – CHASSAGNE - FONTENAY
Page 15 of 47 – US –
Table 3
Burners SF F I UF
GAS Pressure Ø
Natural Gas
6" WC 0.90 1.30 1.45 1.70
L.P. propane
10" WC 0.65 0.90 1.05 1.20

Adjustment of reduced flowrate of surface burners
(Figure 23):
After connection or change of gas, it is crucial to modify this
adjustment.
- Remove the control knob. Light the burner, adjust to
minimum setting, then use a small screwdriver to set the
adjusting screw
J .
Note: Flame is reduced to ¼ of its size in the minimum setting,
the burner must remain lit when changing from maximum
setting to minimum setting.

Refitting the cooking surface:
When refitting the cooking surface, it is vital to tighten fastening screws (figures 13, 14 and 15). Failure to do so can
cause distortion of the cooking surface.
OVEN BURNERS:
Dismounting oven burner
Remove the oven baseplate (Fig.18).
CAUTION: when refitting place the base underneath the groove on the fascia (fig.19).
Unscrew the screw K holding the burner (Fig.20).
Remove the tray.
Unscrew the screw L (Fig.21).
Push the burner to the bottom of the oven and lift to remove it.
Table 4
Burners SF F I UF
GAS Pressure Opening in mm/ inches
Natural Gas
6" WC 2,5 /
1
/
8
2,5 /
1
/
8
max 7 /
1
/
4
L.P. propane
10" WC 3,5 /
1
/
8
max max max
Fig. 23
J

Fig. 24
Fig. 25
L