background image

USER’S MANUAL

CONVECTION ELECTRIC OVEN  

(VERTICAL SIDE OVEN)

The convection electric oven is a real oven whose special shape means that it can be used to cook 

several foods at the same time «higher» than in a conventional oven, such as 2 chickens.

Description :

Made of sheet steel with an acid-resistant enamel coating applied at 850 °C.
The oven have 4 shelf positions allowing shelves and flatware to slide in easily.
The dimensions of oven are

 

305 x 405 x 400 mm, 49 litre.

The convection electric oven is supplied with two oven racks, a roasting tray and a roating tray insert.
The oven is heated by a circular 2650 W surrounding a fan motor in the back wall of the oven.
There is also an electric grill with a power of 2400 W in the roof.
The heating element is controlled by a thermostat switch.
There are 2 indicator lamps on the control panel of the electric-oven version :

- Signal lamp 

 lights when the oven/ grill on.

- Signal lamp 

 shows status of the oven/ grill in use (see below).

Use :

The oven must be pre-heated at the thermostat setting 

chosen for cooking.

Turn the thermostat switch clockwise to the required mark. 
The indicator lamps (

 and 

) are lit. When indicator 

lamp 

 is no longer lit, the selected temperature has been 

reached and you can then place your dish in the oven.
To turn off, turn the control knob anti-clockwise to the O 

position.

Electric grill

The electric oven is equipped with a grill that can be used to grill meat and fish cook all types of 

dishes au gratin. The grill is ideal for finishing off crèmes brûlées or to obtain perfect cooking of a 

rib of beef.

Use

Turn the thermostat control knob one click further to the 

 symbol. To turn off, turn the control 

knob anti-clockwise to the 

O

 position.

Useful hint

 : 

Prior to use, we advise you to read the «Use of the grill on electric ovens” 

paragraph in the “Preliminary recommendations for the use of the ovens” chapter of this 

manual.
REMEMBER

 : - GRILL FOOD WITH THE OVEN DOOR CLOSED

- CHECK THE FOOD every minute or so Lacanche grills are extremely powerful.

Citeaux induction - Ft 158a - GB - Rév 06 - Modifié le : 07/10/2013                     29/36

Summary of Contents for CITEAUX INDUCTIONLVI 1532 E / CT





































Reviews: