5
Fixing the Hood into the Over-mantle and kitchen furniture
Ensure that the base board is securly in position.
Remove grease filter see section 7
The hood will require a minum of two people to lift and hold the extractor in positon while it is being
secured to the base board
When the extractor is in position, using a suitable screw driver turn the fixing clamp screw head clockwise
to secure the extractor to the base board see fig 4
check that the duct has not been flattened or kinked along its route.
Fig 4 Adjustable Fixing Clamp
Fig 5 Fixing Clamp Screw
Warning
Do not reduce the ducting daimeter from 150mm as this will affect the performance of
the hood and could damage the motor. Damage caused to the hood by incorrect ducting
will not be covered by warranty
