background image

 Laboratory2, LTD 

Table 3.Light indication of modes and emergencies. 

Modes and emergency cases 

of the voice recorder

Status of  Indicator "Mode"

a) Getting started (when the recorder 
is being switching on by the user)

1. In normal recording mode, indicator turns green and stays so until 

the end of opening file process (duration of file opening depends on 

the file size and free memory capacity). After opening the file, indi-

cator "Mode" repeatedly flashes green(internal microphone) / orange 

(external microphone), or if the accumulator discharged - red. A fur-

ther indication is possible only by pressing a button. 

2. If "

dict.ini

" file is tasked to operate by the alarm clocks, the indi-

cator lights up green for 1 second and voice recorder enters standby 

mode by switching the alarm. A further indication is possible only by 

pressing a button. 

3. If the recorder is set up to operate as voice operating switch, the 

indicator lights up for 1 second green, and then lights up for one sec-

ond orange. A further indication is possible only by pressing a button. 

b) Mono recording mode (after a brief 
pressing of control button)

1. If the battery voltage is normal, the indicator repeatedly blinks 

green(internal microphone) / orange (external microphone). 

2. If the battery is low, the LED blinks several times in red.

c) Recording mode with voice oper-
ated switch

  

(VOX) (after a brief 

pressing of a button) 

After detecting the audio signal of the preset level – similar to nor-
mal mode

d) Alarm clock record mode (after 

 

brief

 

pressing of the button)

LED blinks slowly red and green colors, independently from the oth-

er recording modes and battery charge level. 

e) Standby mode for alarm clocks 
(Short time after the  brief pressing of 
the control button)

After brief pressing the button, there are triple-time alternate blinks 

red and green. 

f) Emergency - incorrect filing sys-
tem, the lack of a memory card or 
fault-of memory card 

After switching the recorder on, indicator turns green, then - red, and 

then voice recorder turns off. 

g) Status "No free space on the disc"

Indicator, after turning the voice recorder on, glows green for some 
time (depending on the size of the micro SD and size of file being 
created), then recorder turns off.

 

Page  

8

Version of 04.04.2019

Summary of Contents for SOROKA-17E























Reviews: