Connect the power cable to the AC inlet socket
(2) provided on the back of the swivel arm as
shown in the fig 7.
Switch on the power from on/off switch (1).
Note: Power supply is designed with universal
input 100V-240V AC, 50/60Hz. To plug in follow
instruction on electrical label provided at
bottom of the arm as shown (3) here in Fig. 7.
Prima GN
Fig. 7
2 1
3
ELECTRICAL CONNECTIONS
Fig. 8
Open the swivel arm cover’s. Detach the fibre
optic cable and replace the illumination assembly
A with new assembly. Secure back the arm
cover’s.
A
The fuse is located with the AC inlet, provided
near the on/off switch. Use a flat head screw
driver to open the fuse compartment. Two fuses
are provided in this, i.e. one is live fuse and
second as spare fuse. Replace the blown fuse
with live fuse and secure back the fuse
compartment.
For fuse replacement refer label shown in fig. 9
Fig. 9
AC Inlet
On/off Switch
8.1
Replacing the illumination source
8.2 Fuse Replacement
Device Name
Model Number
Serial Number
Input Voltage
Frequency
Max. Load
Separate Disposal
waste electric device
RX Only
Manufacturer
Company
Trademark
Label Control
Number
Fuse Rating
IEC60601-1:2005
Labeling for Canada
IEC60601-1:2005
Labeling for USA & Europe
Accompanying Document
must be consulted
UL Mark
Safety Certification
8
.3 Data Plate for Prima GN Colposcope
13
6165000-795
PRIMA GN
Issue 1.
4
Printed on
March
, 201
6