13
Prima ENT/DNT
7.
Lift the Wheel Support assembly
and cover as shown in Fig. 7. Place it
(wheels down) under one end of the
Center Support as shown in Fig 8.
Repeat procedure for the other Wheel
Support assembly.
8.
Align holes of the Center Support with
the holes of both Wheel Supports and
tighten the screws as shown in Fig. 8
using the 8 mm allen wrench.
9.
Remove 2 screws at center as shown
in Fig. 9 to remove the wooden block.
Unscrew with screw driver as shown in
Fig. 9.
10.
Remove the wooden block as shown in
Fig. 10.
11.
Tighten all screws using the 8 mm allen
wrench.
12.
Place top cover on both Wheel Support
assemblies as shown in Fig. 12.
Fig 7
Fig 8
Fig 9
Fig 10
Fig 11
Fig 12
