1. Flip
” ”
as shown in figure 14.
the main switch to
(ON)
2. Rotating the light intensity adjustment knob (fig. 15)
increases brightness and rotating it in the opposite
direction decreases brightness. The indicator around
the knob indicate the intensity lever.
I
Place the specimen on the stage and release the bow-shaped
lever gently.
: If the bow-shaped lever (3) is returned with a strong
force , the slide glass may break. See figure 16.
Do not adjust the specimen holder directly by hand, for this
will damage the rotary mechanism.
•
When the specimen holder reaches stop position, the
rotation force of the above knobs become heavy. Stop
rotating the knob at this time.
Caution
1. Rotate the coarse adjustment knob (2) in anticlockwise
direction to fully lower the stage.
2. Open the bow-shaped lever (3) outward by pulling lever handle
(1), place the specimen by sliding the specimen glass plate(s)
on the stage from the front toward the rear.
3. After positioning your specimen slides, return the bow-shaped
lever (3) gently by slowly releasing control knob (1).
4. Rotating the upper co-axial knob (4) controls the Y-axis
movement and the lower knob(5) controls the X-axis
movement.
•
1
2
Turning the Lamp ON
Placing specimen on the stage
Fig. 15
Fig. 16
Fig. 14
DETAILED OBSERVATION/INSTALLATION PROCEDURE
11
1
1
1
2
3
4
5
Lx 100/200
The instrument is ready for use after plugging, it does not require any physical installation.
15
Issue 1.0
5030000-795 User Manual Lx-100/200 Printed on July,2013
