OPERATING INSTRUCTIONS
•
•
•
•
•
Turn ON the illumination system of the Microscope.
Place the observation specimen on the glass plate of the Analyzer.
For initial setup of the instrument, the fiducial line of the polarizer
should coincide with 0 on scale. At this position the analyzer and
polarizer set should show the brightest field. 90° left or right of this
position with yield darkest field.
Adjust the required angle of incident polarized light using the scale
provided on the polarizer while viewing the image through the
eyepieces.
Rotate the polarizer slowly to achieve the required position.
CARE & MAINTENANCE
?
?
?
Loose particles can be removed from the surface of the Analyzer and Polarizer by gently wiping
them with lens tissue dampened with Acetone or Methanol.
It is better to avoid leaving finger prints on the surface of Analyzer and Polarizer.
When not in use for long time, it is recommended to store the polarizing kit in its original packaging.
Our policy is one of continuous development. Labo America, Inc., reserves the right to change design and specifications without prior notice.
Labo America Inc.
920 Auburn Court
Fremont
CA 94538
U.S.A.
Telephone: 510 445 1257
Fax: 510 991 9862
LABOMED and CxL are registered trademarks of Labo America, Inc.
With a policy of continuous development, Labo America, Inc. reserves the right to change design and specifications without prior notice.
© 2009 Labo America, Inc. | 9121035-
795
08
-20
18
1
A28240
ISO 9001
LABOMED
