INSTALLATION
1.
Remove the observation head from its position and install the analyzer
by firmly placing the positioning pin of analyzer into the locating hole of
dovetail adapter as shown in Fig. 1 and Fig. 2
Remount the observation head into its position.
2.
Remove the blue filter from condenser assembly as shown in
Fig. 3.
3.
Gently fit the polarizer into the condenser’s base from where the blue
filter has been removed as shown in Fig. 4
4.
Now the polarizer kit is ready for use as shown in Fig. 5
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
