5.0 Cleaning and Maintenance
Prior to any cleaning or maintenance of the unit, dis-
connect the power cord from the wall outlet.
5.1
No routine maintenance on the unit is required.
5.2
Clean the unit internally and externally with a damp cloth and
mild soap. Do not immerse the unit or spill liquids into or on the unit.
Use of alcohol or ammonia based cleaners on the door window may
cause the window to craze.
Allow the incubator to dry completely inside and out before recon-
necting the power and using.
6.0 Troubleshooting and Service
If the unit fails to operate, check that the unit is plugged into a
properly grounded working wall outlet. Check that the unit is
switched on and the power switch is illuminated and that the tem-
perature controller is turned up. Finally, check the fuses.
If return of the unit is needed, contact Labnet’s Service Department
for return authorization at 1-732-471-0700. Please have the serial
number of the unit available when you call.
!
