Labnet C2500-R, User Manual, Page: 9 / 24

6
Figure 1. Loading the rotor
3.5.
Starting and Stopping a Run
Please refer Chapter 5 Operation to set up your preferred settings of
time, speed and temperature.
To start a run, press down the ( START/STOP) knob.
When the pre-set time expires, the centrifuge will stop automatically.
To stop the centrifuge prior to the expiration of set time, press the
( START/STOP) knob again.
When the time is set as “ continuous ”( - - ), the centrifuge will run
continuously. To stop the continuous run, press the
( START/STOP) knob.
By pressing and holding the button, the centrifuge will continue a
Securing
screw