Operation
CoaDATA 501 – Operators Manual 2.1
Page 13
The results will be displayed consecutively for duration of 5 sec. The printer
will automatically print the results. The last message
cuv out then press
"Reset"
will request the removal of the cuvettes from the measuring
channels.
<- mean time =
.. 12.4s
Display of mean value in [sec.]
% = 91.0
Display of activity in [%]
INR = 1.05
Display of INR
If ratio is selected under 2nd conversion, ratio will be displayed instead of
INR.
<-cuv out, then
.. press „Reset“
• Open the light protection cap.
• Remove cuvette from measuring channel and confirm by pressing
Reset-
key
(see chapter 3
Software
).
The analyzer is now ready for additional measurements.
cuv in 1
Continue as described for additional measurements.
The timer can be started or stopped manually by pressing the
Start-key.
Refer to function keys in chapter 1.2
2.1.4 How to change methods
Methods can only be changed from STANDBY.
< 1 PT >
STANDBY
• Press
Esc
to switch to
STANDBY
.
• Press the
right arrow
; the next method aPTT is displayed as ready-to-
measure.
• Press the
arrow
-key
-->
(arrow-key <-- back); the following
methods
and
the
UTILIT
IES
Menu
will be displayed:
< 1 PT
>
< 2 aPTT
>
< 3 Fib. 1 >
g/l
< 4 Fib. 2 >
mg/dl
< 5 Thrmb >
< 6 Intr. >
< 7 Extr. >
Can be overwritten by ChipCARD!
< UTILIT
>
NOTE
