Labgear S401, User Manual

Page: 9 / 16

!
!
!
!
!
!
8.7 Satellite Installation
• Satellite settings
• Auto scan
• TP manager
8.7.1 Satellite Setting
In the Satellite Setting main menu:
Press the
Red
key to enter the Transponder screen.
Press Green key to enter the Auto Scan screen.
Press
pq
keys to move the cursor to select a satellite press OK .
Press
u
to access the individual satellite properties.
Once in the individual satellite properties screen:
1.
TP Manage
press
Red
key to enter the
TP manager
screen.
2.
Auto Scan
: press the
Green
key to enter the Auto Scan.
3. LNB : Press
t u
key then change the LNB frequency.
4. Transponder : Press
t u
key to change the current TP.
5. DiSEqc 1.0 : Press
t u
key to change the DiSEqC port.
6.
DiSEqc 1.1
: Press t u key to change the DiSEqC port.
7.
Motor
: Press t u key to change the DiSEqC port.
If you are selecting DiSEqC1.2/USALS, press OK to
enter the motor interface.
•
Transponder
: Press
OK
to change the current TP.
• Mode: A , Position
A1 Direction
: Press t u key to move direction to west or east.
A2 Position
: Save the dish position for the satellite.
•
Mode: B
, Drive to Zero
Move the cursor to
GO
, then press
OK
, the motor will move to zero.
• Mode: C , Drive to stored position
Move the cursor to
GO
, then press
OK
, the motor will go to the position saved in mode
A
Position.
• Mode: D , Drive to Satellite
Move the cursor to
GO
, then press
OK
, the motor will go to the auto calculate position.
• Mode: E , Recalculate
E1
Direction: Press t u key to move direction to west or east.
E2 Recalculate
: Recalculate the satellite position.
• Mode: F , Set East Limit or Set west Limit to restrict the motor movement to the East or to the West.
F1 Direction
: Press t u key to move direction to west or east.
F2 Store : Save the satellite position of A2
•
Mode: G
, Set Limit enable or disable - Set the limit enable or disable.
8. Unicable : Press
t u
key to select Unicable then press OK into the Unicable setting.
•
Transponder
: Press t u key to change the current TP.
•
IF Channel
: Press t u key to change SCR channel.
• Center Frequency : Use number key to input number.
S401 - Satellite Installation / Setting
9