Labgear LAB3522, Installation Manual & User Manual

Page: 11 / 17

User’s Manual 4CH DVR
— 10 —
MOTION RECORD DURATION:
The number indicates how many seconds motioned
recording lasts after the movements in front of the camera.
MOTION ALARM DURATION:
The number indicates how many seconds motioned display
on the screen “ MOTION ”.
Motion Setup:
The first step, User need setup video record method by Motion Triggered. Please make Reference
to 5.7.
CHANNEL 1- 4 SENSITIVITY:
User can press“ Select” to adjust sensitivity grade of
motion detection.
High (1----------9,OFF) Low
When it’s off, the channel can’t be triggered by movement .
CHANNEL 1- 4 AREA SET:
Press “ Select” to enter area setting state, the picture of selected channel is divided into 144
(12*12) blocks, and then press “ REW ” to move left, press “ FWD ” to move right, press “ UP ” to move
up, press “ DOWN ” to move down, press “ Select ” to set the block is active or not. When the
block is transparent, it’s active to record; when the block is covered by shadow, it can’t be recorded.
After completed the “MOTION SET”, User can exit by
「
Menu
」
, And press [ Record ]
to star Motion Record.
5.16 NTSC/PAL Output Select
Change jump JS1 to select NTSC or PAL video output format according to the silkscreen on
the PCB.
MOTION SETUP
MOTION RECORD DURATION 5
MOTION ALARM DURATION OFF
MOTION DETECTION SETUP
PRESS(UP,DOWN), THEN(SELECT)
PRESS(MENU) TO EXIT
MOTION DETECTION SETUP
CHANNEL 1 SENSITIVITY 4
CHANNEL 2 SENSITIVITY 4
CHANNEL 3 SENSITIVITY 4
CHANNEL 4 SENSITIVITY 4
CHANNEL 1 AREA SET
CHANNEL 2 AREA SET
CHANNEL 3 AREA SET
CHANNEL 4 AREA SET
PRESS(UP,DOWN), THEN(SELECT)
PRESS(MENU) TO EXIT
NTSC/PAL