Labex Digital User Manual, Date: 20 April 2020, # 7
Charging the battery
After you pull out your drained battery, you should charge it with the
included intelligent charger:
1)
Put the battery inside the charger while minding the “+” and the “–
“.
2)
Put the charger into an electrical socket.
3)
The corresponding red LED will light up, meaning the battery is
currently charging.
4)
The red LED will turn off when the battery is fully charged.
NOTE: The included intelligent charger will NEVER overcharge your
batteries.
WARNING: Do not try to put ANY other kind of battery inside the charger!
The charger is designed ONLY for Li-Io(Lithium-Ion) batteries! Putting any
other kind of battery inside the charger will result in permanent damage to
the battery and the charger!
NOTE:
If you find that the battery in your device can not hold a charge for more
than one hour of use, there is a possibility that the battery you are using is near
the end of its life cycle. If this happens, we advise you to recycle this battery and
get a new one.
C
ARING FOR YOUR DEVICE
Cleaning and maintenance
Since the device is in constant contact with skin and other surfaces, it
should be cleaned at least once every 24 hours. For the best hygiene
practices, the following procedure should be followed:
Clean the outside surfaces of the device with a slightly wet soft
microfiber cloth.
After cleaning all the surfaces, you can disinfect the device by
applying a small amount of disinfectant gel or alcohol. Alternatively,
alcohol wipes can be used.
Wipe the device with a soft microfiber cloth again.
