Labex Digital User Manual, Date: 20 April 2020, # 6
4)
After you reached the desired pitch, press the START button. The
device will automatically save your desired pitch.
How to reset all settings to factory defaults
If you feel that you want to revert the device to its factory default
volume&pitch follow these steps:
Press and hold all the buttons at the same time (START, UP and
DOWN buttons).
The red Battery Indicator LED will start flashing. Continue to hold
all the buttons until the Battery Indicator LED stops flashing and
lights up in solid red.
When the Battery Indicator LED turns solid red, release all the
buttons and wait 3-4 seconds. All the settings have been reset to
the factory default.
Check our website for video tutorials.
B
ATTERY
Low battery
Labex Digital has a built-in battery indicator, which will warn you when the
battery level gets low. When the battery goes down to 20%, the Battery
Indicator LED will start blinking after every press of the START button.
When the battery drains down to 10%, the Battery Indicator LED will light
up solid red after each press of the START button. At this point, you should
replace your battery with a fully charged one.
Different batteries
There are two high capacity Li-Io batteries included with your Labex Digital.
This will allow you to always have a fully charged battery on hand.
However, Labex Digital is compatible with all 9V batteries on the market –
rechargeable or non-rechargeable.
