57
SET-UP RECORD
NOTE:
If this machine is supplied with any optional equipment, refer to the
Options section of the manual before proceeding with documentation.
Documentation is an important step that many people overlook. Complete documentation will help you to
make rapid and accurate change-over. This manual provides a form that allows you to record all of the
machine settings for each label. Although the microprocessor will keep the settings in its memory, it is a
good idea to have a written record of all of the settings. This will enable you to quickly reset a label page
and will provide a back-up in the event that a label page is accidentally altered.
Place the machine offline before you perform the following procedures or you may be
injured by the moving drive roller.
1. Make sure that the current microprocessor settings consistently apply the label accurately on the
product.
2. Place one label in the space provided.
3. Fill in the date, name of the person who set up the applicator and the product to be labeled.
4. Measure and record the distance from the peeler bar tip to the product, the peeler bar tip to product
detector, the conveyor speed and products per minute.
5. Place the machine
OFFLINE
.
6. Cycle through the menu items in the Operator menu and the Advanced menu, and write the
information on the form.
7. Include any comments or observations that might help you or someone else set up the machine (i.e.,
product orientation instructions, peeler bar alignment, etcetera). The applicator is now completely set up,
documented and ready for use.
for parts & service call QLC (800) 837-1309
Summary of Contents for 3115NV
