Chapter 4: Lyo-Works Operating System
Product Service 816-333-8811 or 1-800-522-7658
26
Original instructions
Delete
– Use this button to delete an existing email address.
Device Name
– The default name for this field will be “Labconco
Freeze Dryer”. The name can be edited by pressing the name field.
Configure Email Settings
– Pressing this button will bring up the
following screen, where the appropriate email settings can be
entered.
If you do not know the proper information to enter into each of the SMTP
fields, consult your IT personnel or email service provider.
After entering the appropriate information in all of the SMTP fields, press
the Save button. The system will check the information entered into each
field to make sure each entry is valid. If one or more invalid entries are
found the following message will appear
: EMAIL SETTINGS ERROR –
Error connecting to email server, check your settings.
If all the SMTP fields entered are valid, but the network connection is not
working (or Ethernet cable is not connected) the following message will
appear after pressing the Save button:
EMAIL SETTINGS ERROR –
Network connection is not active
Test Email
– After the Email Settings and Network Settings have
been correctly entered, pressing this button will send a test email to
the selected email address.
Select Alerts
– The type of alerts that will be sent to each
individual email address can be customized. Pressing the Select
Alerts button will bring up the following selection list. Alerts can
be selected or deselected by pressing the check box in front of each
alert. Scroll list up or down by swiping screen up or down.
