Chapter 4: Operating Instructions
Product Service 816-333-8811 or 1-800-522-7658
16
Press ENTER if you do not want to reset SERVICE HOURS.
Press and hold
for 5 seconds to reset the Service Hours to 0. This
allows you to keep track of the time the refrigeration system operated
since it was serviced.
The display will show:
Press ENTER.
The display will show:
Press ENTER if you do not want to reset SERVICE HOURS.
Press and hold
for 5 seconds reset the Service Hours to 0. This
allows you to keep track of the time the vacuum pump operated since
it was serviced.
The display will show:
Press ENTER.
The display will show:
Press
or
until the desired time interval is shown. The time
between data transmission may be set to occur at 10, 30, 60, 300 or
600 seconds intervals.
Press ENTER.
REFRIGERATION TOTAL HOURS: XXXX:
RESET SERVICE HOUR: ?
X
VACUUM TOTAL HOURS: XXXX:
SERVICE HOUR: XXXX
VACUUM TOTAL HOURS: XXXX:
RESET SERVICE HOUR: ?
X
RS-232 TRANSMISSION RATE:
10
SECONDS
