background image

 

 
 

86 

Appendix E: References 

 
Kruse, R.H., WH. Puckett and J. H. Richardson.  1991.  

Biological Safety Cabinetry

, Clin. Microbiol. Rev. 4:207-

241. 
 
Miller, C.D., D.H.M. Groschel, J. H. Richardson, D. Vesley, 
J. R. Songer, R. D. Housewright and W. E. Barkley.  1986.  

Laboratory Safety, Principles and Practices

, American 

Society for Microbiology, Washington, D.D. 
 
National Research Council (U.S.) Committee on Hazardous 
Biological Substances in the Laboratory.  1989.  

Biosafety in 

the Laboratory.  Prudent Practices for Handling and 
Disposal of Infectious Materials

.  National Academy Press, 

Washington, D.C. 
 
Rayburn, S.R. 1990.  The Foundations of Laboratory Safety, 
Springer-Verlag, New York. 
 
U. S. Department of Health, Education and Welfare.  

Formaldehyde Decontamination of Laminar Flow Biological 
Safety Cabinets

, National Institutes of Health, Division of 

Safety, Bethesda, MD 20892. 
 
U. S. Department of Health, Education and Welfare.  

Effective use of a Laminar Flow Biological Safe Cabinet.

  

National Audiovisual Center (GSA), Sales Branch, Catalog 
No., NAC 005133, Washington, D.C. 
 
U. S. Department of Health, Education and Welfare.  1975.  

Selecting a Biological Safety Cabinet

.  National Audiovisual 

Center (GSA), Sales Branch, Catalog No. NAC 000709, 
Washington, D.C. 
 
U. S. Department of Health and Human Services.  1999.  

Biosafety in Microbiological and Biomedical Laboratories, 
4

th

 ed

. U.S. Department of Health and Human Services, 

Publication No. (CDC) 93-8395.  U. S. Government Printing 
Office, Washington, D.C. 

 

Summary of Contents for 3980200






























































































Reviews: