Page
16
Z-PLANE Instruction Manual
V1.0
Once you are happy with the control being set, you can click ‘OK’ to continue with the new setting,
or ‘CANCEL’ to abort the mapping. Also note that if you accept this mapping, the control (if already
linked to another) will be fixed to the new mapping. Any previously set mappings will be ‘moved’ to
the new mapped control. This should be used with care if you already have pre-defined Remote
Override mappings.
This Remote Overriding method can be handy if you don’t know how to set up your own MIDI
controller to the dedicated MIDI controls mentioned in the previous chapter. For speed, you can
simply double click a blue arrow, and the arrow with turn into a spinning yellow Lightning bolt,
indicating that Reason is awaiting a MIDI signal to that control. You can then adjust a MIDI control
on your MIDI device, and the control will map automatically without the need to use the popup
previously mentioned. Double-click each specific control you want to map to save time and to use
the mapping in a faster method.
All Remote Overrides can then be used to record automation within Reason, which can be fine tuned
using the Sequencer and the clips (see the Reason Operating Manual for more information on how to
edit & record automation)