800.900.9276
•
Fax 800.559.1583
(Customer Service, Service Advisors)
20 Industrial Way, Rochester, NH 03867
•
603.335.6300
•
Fax 603.335.3355
(Applications Engineering)
1869 Sismet Road, Mississauga, Ontario, Canada L4W 1W8
•
905.238.0100
•
Fax 905.366.0130
www.Laars.com
Document 4306
Mascot ST Outdoor Cover Kit for Outdoor Installation
Page 3 of 4
3. Using the phillips screw drivier, remove the original vent pipe collar.
Save the screws for re-use in Step 4.
4. Place the Exhaust Adapter into the exhaust vent and fasten it into
place using the original screws.
5. Install the Exhaust Pipe into the Exhaust Vent Adapter. Ensure the
pipe is positioned as shown.
6. Take one of the Vent Screens from the Mascot ST installation kit
and insert it to the intake vent collar as shown. Tighten it down
using the clamp on the vent collar.
Qty
Included Kit Component
Descriptions
#
1
Outdoor Cover
1
2
Self Tapping Screws
2
1
Exhaust Pipe
3
1
Exhaust Screen
4
1
Exhaust Adapter
5
1
Replacement Front Cover
6
1
Outdoor Kit Instructions
7
LP-592 Rev. 1.20.16
8
Replacement Parts
Figure 11 - Replacement Parts
Number
Description
Part Number Number
Description
Part Number
1
7850P-257
5
7850P-088
2
7855P-258
6
7855P-255
3
7855P-389
7
7855P-389
4
7850P-259
Table 7 - Replacement Parts
Outdoor Enclosure
Exhaust Screen
Exhaust Pipe
Front Cover
M4 X 10 TH + Self Tapping Screws
M4 X 10 TH + Self Tapping Screws
Exhaust Adapter
1
3
2
4
5
6
7
Screw Gun w/ 8mm Socket Drive.
Phillips Head Screw Driver
Tools Needed for Kit Installation
3
4
1
2
6
5
Installing the Outdoor Cover Kit
1. Remove the front cover from the unit. Keep the 4 original screws
for re-use. They will be used later to fasten the Replacement
Front Cover to the unit. Discard the original front cover as this kit
includes a replacement front cover desgined for outdoor use.
2. Carefully stand the unit up in the box, using the styrofoam in the box
to protect the components on the bottom of the unit. Or set the unit
onto one of it's sides on a steady workbench.
