background image

MANUAL LMDG 200 


  

4.2. SELECTING THE RIGHT PLACE 

 
When selecting the right place for the machine, please consider the following: 
 
-  Put the device on smooth, horizontal and stable place. 
-  Leave enough space beyond the device for normal air circulation, min. 200 mm at 

the back of the machine. 

-  Leave enough space around the device, that you will easy control and maintain it. 

Don’t  use  the  device  in  surroundings,  where  there  are  fast  temperature  and 
humidity changes. Also avoid places exposed to direct sunlight and places nearby 
heating devices. 

-  Avoid places, where the possibility of shocks and vibrations exists. 
 

Note:  The  machine  should  not  be  placed  so,  that  it  is  difficult  to  pull  out  the 

cord plug from mains power supply. 

 
 
 

4.3. CONNECTING THE POWER CORD 

 
The  correct  voltage and  frequency  for  the  LMDG  200  are given  on  the name  plate. 
Ensure that these values correspond to the available power supply system. 
 Connect the machine with the plug supplied to a grounded wall socket. 
To avoid interference from noise, surges and spikes, a dedicated line is preferred. If 
no  such  line  is  available,  avoid  lines  to  which  powerful  electric  motors,  refrigerators 
and similar devices are connected. 
 
The  power  can  be turned  on  and  off  by  the  emergency  switch,  located on  the  front 
cover at the right side of the machine. Light in the switch indicates, when the power is 
on. 
 

Emergency switch to turn on and off the LMDG 200 

 
 
 
 
 
 

Summary of Contents for LMDG 200


















Reviews: