Laarmann LMDG 200, User Manual

Page: 6 / 17

MANUAL LMDG 200
6
3.2. TECHNICAL DATA
Power supply 400V ± 10% - 50Hz
Rated power 4000W
ON/Off By ON/Off Switch
Max. collector volume 3000 ml
Gap adjustment By flexible setting
Throughput Up to 150kg/h
Dimensions W x D x H
(inclusive base plate) 1000 x 1200 x 500
Weight 200 kg
Shaft speed 300rpm
Noise emission
(without milling bowl) 70 dB(A)
Ambient temperature +5°C - +40°C
Atmospheric humidity < 85% RH
4. INSTALLATION
4.1. UNPACKING
Before the installation, carefully examine the delivery for possible damage or missing
parts. Open the crate and take the machine out of the box. Check that the machine
has not been visibly damaged during the transport.
Please keep the packing material for the duration of the guarantee period. In case of
a complaint and return of the machine in unsuitable packing material, your guarantee
claim will be lost.
Check that the mains cord is compatible with the local standard.
If any kind of damage occurred during transport, immediately make a complaint to
the carrier. Any incorrect delivery or missing parts should be reported to the
distributor.
After opening and removing the wooden crate remove the 4 screws in each corner of
the metal base of the LMDG 200. Connect a belt at the hook of the motor and at the
hook of the housing to lift the machine from the pellet.