Supplement to installation manual_Sliding Gate_2-Leaf_No.7407
This document is the exclusive property of FTFM La Toulousaine and must on no account be copied. The document may be modified at any time in accordance with product changes.
10/17
p.11
Programming the operators
OK
Up/Down
Simple menu: Basic settings
Operator at halfway point and engaged:
(
English
+
OK.
-
Turn the operator on
-
Press 1 x OK
(
-
Select the direction
appears
),
press 1 x
(
opening direction) choice of
(
)
internal view +
OK.
-
Choi
ce of
( :
auto closing
) o
r
(
:
semi-auto closing
),
select
+
OK.
-
Start the autotest with the gate at the halfway point, it will close.
If it is not a closing operation, press and at the same time.
Reconnect the operator
in the correct direction (refer to menu: Direction ).
-
When the autotest is complete, OK will appear on the display.
-
Start programming the remote controls
:
will appear on the display, wait a moment.
Then the screen will display
: You can now program your remote controls.
SUO: Gate open
SUC: Gate closed
EnG
Please note:
The Master operator
can be positioned
on the
right
.
Program
as follows
;
- Master operator (on right)
- Slave Master (on left)
Configure the uplink boards in opposite mode
o
r
Master Operator
Slave Operator
Summary of Contents for 7407
Page 16: ......
