![background image](http://html2.mh-extra.com/html/la-spaziale/s8-series/s8-series_installation-instructions-manual_3130519028.webp)
espresso coffee machines
26
8
9
-
LSI 089 - Rev. 00 - Ed. 04/2015
Take note!
It is possible to deactivate the electric heating of the heating elements by pressing the button (
f) on the programming panel.
Once deactivated, the relevant symbol (
b) on the control panel will switch off to indicate this state. To reactivate the electric
heating, press the button (
f) again: the symbol (b) will switch on.
5.7 TEMPERATURE PROBE CALIBRATION
Switch off the appliance.
Press and hold down the button
(
h) and switch on the appliance.
The “120” symbol will light up on the control panel and the temperature will automatically be set to 120°C. It is possible to check the
status of the heating elements with the relevant symbol (
b): if lit, it means that the SET Temperature has been reached; if flashing, it
indicates the heating phase.
Using the buttons (
i)
or
(
g) you can change this datum.
Each time that the buttons are pressed, probe calibration is changed by 0.5 °C.
If the symbol after “120” is flashing, this means that a change of 0.5 °C has been made; if it is lit, the change is 1 °C.
Take note!
Probe calibration is performed by the manufacturer during the appliance testing phase.
Only perform the above procedure after temperature probe replacement.
Summary of Contents for S8 Series
