26
5. USE INSTRUCTIONS
➢
DISPLAY BOARD
Modes
SABBATH MODE
Sabbath mode is available for the observance of certain religious holidays. This mode turns off the
displays, interior light and audible alarms and prevents them from turning on again. Normal cooling
operations will still take place. To initiate sabbath mode, press the power (R) and light (K) keys at the
same time for at least 3 seconds. The indicator light will flash four times and confirm the sabbath mode is
ON. Sabbath mode can be stopped by repeating the above process. The sabbath mode will automatically
exit after 96 hours.
H
Red LED indication of the selected temperature range.
(temperatures between 15 ° C and 20 ° C or 59 ° F and 68 ° F)
I
White LED indication of the selected temperature range.
(Temperatures between 9 ° C and 14 ° C or 48 ° F and 58 ° F)
J
Yellow LED indication of the selected temperature range.
(Temperatures between 5 ° C and 8 ° C or 40 ° F and 47 ° F)
K
Press the button to turn on/off the light, lighting switches off automatically after 10 minutes.
L
Display shows the temperature at its setting, 10 seconds later it will automatically turn to
actual temperature inside the wine cellar till reaching the setting one
If the temperature is too high (>30°C), the code "HH" appears on the display and an audible
alarm sounds.
The audible alarm can be deactivated immediately by pressing the “on” / “off” button o
r by
unplugging the cellar. In this case please contact the after-sales service.
If the temperature is too low (<3°C), the code "LL" appears on the display and an audible alarm
sounds.
The audible alarm can be deactivated immediately by pressing the “on”
/ “off” button or
by
unplugging the cellar. In this case please contact the after-sales service.
M
Temperature displayed in Fahrenheit.
N
Temperature displayed in Celsius.
O
Press the button to raise the temperature of 1 degree Celsius or Fahrenheit.
P
Press the button to lower the temperature of 1 degree Celsius or Fahrenheit
Q
Select temperature display in Celsius or Fahrenheit by pressing once
R
On/off switch. When you plug the device into a power outlet, it automatically turns on with
actual temperature shows in the display, till reaching the memoried setting (setting
temperature before turn off)