Page 18 of 36
EXTRA FOAMED MILK FUNCTION
Extra milk function enables to dispense extra foamed milk in the following way:
-
Press any milk-based key and keep it pressed, after 2 seconds foamed milk will start being dispensed.
-
By releasing the pressed key, dispensing will be stopped.
WARNING:
This function is not enabled for self machine, for self machine with credit card, for self machine with coin mechanism, and for self with credit
card + coin mechanism.
STEAM DISPENSING
To warm up drinks (milk, cognac, etc.) do as follows: put the steam nozzle into the drink you want to heat up and then press
the key N°10 to start and stop dispensing.
The display shows:
STEAM
WARNING:
a)
Handle the steam nozzle with caution because it migth cause burns, due to high temperature.
b)
The steam message will not be displayed in case another dispensing is being carried out.
c)
Steam cannot be dispensed simultaneously with hot water.
d)
This function is not enabled for self machine, for self machine with credit card, for self machine with coin mechanism, and for self
with credit card + coin mechanism.
SYSTEM TEMPERATURE INFORMATION PROCEDURE
To enter the info temperature system environment, proceed as follows:
Remove the smart card from the slit and press the key n° 15, the display shows:
INFO: SYSTEM TEMPERATURE
COFFEE TEMPERATURE
XX°C
STEAM TEMPERATURE
YY°C
Where:
XX°C
indicates the temperature of the coffee boiler in ° Centigrade or ° Fahrenheit
YY°C
indicates the temperature of the steam boiler in ° Centigrade or ° Fahrenheit
The system temperatures will be displayed for 5”.