EN
100
Display
Operating Procedure
Description
“Technical” Programming
Cup Warmer
Settings
Cup Warmer
• This parameter allows the technician
to enable or disable the cups heating
function.
• This parameter allows the technician
to adjust the operating time of the
resistance for the heating of the cups.
• This function is displayed only on the
models of espresso machine equipped
with this accessory.
• In TIME mode it is possible also to
stop and to restart the cycle of the cup
warmer by pushing the cup warmer
button (item 5 fig. 1).
After accessing the “Technical” programming menu and entering the password, use the buttons
T1
and T2
until the following screen is displayed.
Press the T3 button
to enter the menu.
Press the T3 button
to enter the menu, move between the parameters using the buttons
T1
and T2
to select
ENABLED
or
DISABLED
, press the T3 button
to confirm the option.
Press the T3 button
to enter the menu, move between the parameters using the buttons
T1
and T2
to select
TIME
or
BY BUTTON
, press the T3 button
to confirm the option.
Press the T3 button
to enter the menu, move between the parameters with the buttons
T1
and T2
to set the desired time, press the T3 button
to confirm the value.
Press the T3 button
to enter the menu, move between the parameters with the buttons
T1
and T2
to set the desired time, press the T3 button
to confirm the value.
Enter Password
******
Cup Warmer
Settings
Cup Warmer
ENABLED
Cup Warmer T On
2min
Cup Warmer T Off
8min
1
2
3
4
5
6
Cup Warmer Mode
TIME
Summary of Contents for Strada AV
Page 115: ...EN 115...
Page 116: ......
