La Marzocco pico, Manual

Page: 6 / 45

EN
6
4. Packaging
1) Ensure product’s integrity by inspecting
the packaging, making sure it presents
no signs of damage which might have
affected the enclosed machine.
2) Check the machine’s integrity after
having carefully removed the packaging.
Packaging (boxes, plastic bags, foam parts
and whatever else) must not be left within
easy reach of children, due to the potential
danger it represents, nor be discarded in
the environment.
5. Decommissioning and Demolition
Start by setting the main switch to the “0”
or OFF position.
5.1 Disconnecting from the power outlet
Disconnect the appliance from the
electrical network by switching off the
associated circuit breaker or circuit
protection device. Remove the power
supply cord from the power connection.
5.2 Recycling notice: Warning for the protection of
the environment.
Used Electrical and electronic
waste contains hazardous
but also valuable and scarce
materials which should be
recovered and recycled properly.
We kindly ask that you contribute
to the protection of the environment
and natural resources by delivering used
equipment to relevant recycling locations if
such locations are available in your country.
6. Use
7. Installation
- The equipment must be installed to com-
ply with the applicable federal, state or local
electrical and plumbing codes. The instal-
lation also must comply with the manufac-
WARNING
This appliance must be placed in
a horizontal position on a counter
higher than 115 cm from the
ground.
WARNING
This appliance is not suitable
for outdoor use. Jets of water
should not be used to clean the
machine, nor should it be placed
where water jets are used.
WARNING
This aplliance is designed only for
grinding roasted coffee beans.
Any other use is understood to
be improper, and consequently
hazardous. The manufacturer
shall not be liable for any damage
as a result of improper or
incorrect use.
Do not use the appliance for
grinding other types of food, or
other items.
WARNING
The manufacturer declines
any responsibility for any
event leading to liability suits
whenever grounding has not
been completed according to
current local, national, and
international regulations and
electrical codes, or other
electrical parts have been
connected improperly.
WARNING
The warranty will be void in case of:
• Incorrect use, not in accordance
with the design purpose;
• Use of non-genuine spare parts;
• Power cord tampered with;
• Components tampered with;
• Repairs made by unauthorized
personnel.