EN
44
Display
Operating Procedure
Description
Water filter
0
• This parameter allows the technician
to preprogram an alarm that notifies
the user when the water filter requires
service or replacement.
• When the programmed volume of
water has passed through the espresso
machine the error message “Change
Filter” is displayed.
• A value of 0 (zero) disables the filter
alarm parameter.
“Machine OFF” Programming
Water Filter Alarm
Enter into “Machine Off” programming mode.
Scroll through the displayed parameters using the button
until the following display appears:
Press the button
or the button
to change the value of the flasing parameter.
When finished, press the button
to continue to the next parameter.
When the espresso machine has dispensed the value of this parameter the message “Filter Alarm” will appear.
NOTE: To reset this message turn off the espresso machine using the main power switch.
Then, press and hold the button
and the button
and turn on the machine using the main power switch.
Hold both buttons until the following message appears. Release both buttons and continue to use the espresso
machine as normal.
1
OFF 09:30
Language
English
Water filter
0
Filter
Alarm
Filter
Reset
2
3
4
5
Summary of Contents for GS/3
Page 30: ......
