11
2.2.8 Default Setting
Press the SET switch with “DEFAULT SETTING” selected in order to reset the controller settings to default. The
control will ask to verify the reset settings. Press SET to reset the settings or BACK to exit and cancel the
change.
2.3
Normal Operation
The RHF is designed to be set only once and require no additional attention.
3
Communications (Optional).
3.1
Setting up a Local Network Connection using Static IP
Go to the Internet Protocol (TCP/IP) Properties in windows and change the computer IP address using the
specified Subnet mask (255.255.255.0).
The RHF is setup with a Static IP. The default static IP is 192.168.1.100. If more than one RHF are to be used
on a network, the IP address will need to be changed manually.
EXITING
CONFIGURATION
SET TO ACCEPT
BACK TO EXIT
>DEFAULT SETTING
SET O/P VOLTAGE
