5
Figure 4
–
Removing a wire from the connector
1.2.1 AC Input Connections
Check that the source voltage and frequency match the charger specifications. Select wire size using Table 1.
Before connecting the Battery/HCAP and/or DC loads, Refer to Section 2.2 for the configuration instructions. For
AC Terminal location refer to Figure 5.
•
For AC systems with a line and neutral such as 120Vac service in North America, connect Line to the “L”
& neutral to the “N”.
•
For AC systems with “2
-
hot leads” or Line
-1 & Line-2 such as 240Vac service in North America, connect
Line-
1 to “L” &
Line-
2 to “N”.
•
All installations require the Ground terminal to be connected to the AC service Ground/Earth wire.
•
All installations require 3-wire connections to the AC Input connector
Figure 5
–
LMESpro AC/GND Connections
