La Marche A36D, Instructions Manual

Page: 19 / 33

MODEL A36D SERIES - INSTRUCTIONS AND TROUBLESHOOTING
Page 19 of 33
10.3 TIMER MODES
To check or change Timer Modes, push and hold equalize switch for 5 seconds, now in the cal alarm
adjustment section. The display will scroll, showing each alarm & settings until the timer mode "LED" (the
bottom "LED") starts to flash, and the digital display shows P? (?= Mode 0,1,2,3,or 4). To change mode use
equalize select switch. Toggle "up" rises and "down" lowers setting.
MODE 0
DISPLAY indicates P0
This is the standard timer mode. If the unit is put in equalize, the timer will switch the charger into the
equalize mode and the equalize "LED" will indicate. The timer will automatically return the charger to the
float mode when the equalize cycle is complete. The number of hours of equalize charge is determined by
setting the switch that controls the equalizing hours. Switch the equalize switch again to cancel the equalize
cycle. Mode 0 is manually operated.
MODE 1
DISPLAY indicates P1
This mode of operation automatically starts an equalize cycle every 7 days. The length of this cycle is again
determined by the timer setting. After the equalize period the timer will wait for another 7 days and then
restart.
MODE 2
DISPLAY indicates P2
This mode of operation automatically starts an equalize cycle every 14 days. The length of this cycle is
again determined by the timer setting. After the equalize period the timer will wait for another 14 days and
then restart.
MODE 3
DISPLAY indicates P3
This mode of operation automatically starts an equalize cycle every 30 days. The length of this cycle is
again determined by the timer setting. After the equalize period the timer will wait for another 30 days and
then restart.
MODE 4
DISPLAY indicates P4
This mode of operation automatically starts an equalize cycle when the DC voltage drops below the low
voltage setting for 30 seconds or longer. The battery voltage must rise above 2.01 to activate this mode.