Assembly Instructions
1. Remove the Bike Trailer from the carton and check the contents against the
parts list.
2. Unfold the Bike Trailer frame and remove all the components from the inside
(Fig 2).
3. Lift both side panels into an upright position (Fig 3). Remove the screws from the
crossbar by turning it in a counter-clockwise direction and slide the back of the
seat over the crossbar.
4. Align the conical plastic washer on the end of the crossbar with the holes on the
sidebars of the upper frame. Once aligned, insert the screws through the holes in
the frame into the crossbar; turn the screw in a clockwise direction to secure the
crossbar to the frame with the threaded knob as shown below (Fig 4-5).
(Fig 2)
(Fig 3)
Summary of Contents for ZKI-BT
Page 1: ...BIKE TRAILER...
